Subversion Repositories freemyipod

//

//

//    Copyright 2010 TheSeven

//

//

//    This file is part of emBIOS.

//

//    emBIOS is free software: you can redistribute it and/or

//    modify it under the terms of the GNU General Public License as

//    published by the Free Software Foundation, either version 2 of the

//    License, or (at your option) any later version.

//

//    emBIOS is distributed in the hope that it will be useful,

//    but WITHOUT ANY WARRANTY; without even the implied warranty of

//    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

//    See the GNU General Public License for more details.

//

//    You should have received a copy of the GNU General Public License along

//    with emBIOS.  If not, see <http://www.gnu.org/licenses/>.

//

//

#include "global.h"

#include "mmu.h"

#include "panic.h"

#include "usbdrv.h"

#include "thread.h"

#include "timer.h"

#include "usb.h"

#include "usb_ch9.h"

#include "synopsysotg.h"

#include "util.h"

struct ep_type

{

    bool active;

    bool busy;

    bool done;

    int rc;

    int size;

    struct wakeup complete;

} ;

static struct ep_type endpoints[5];

static struct usb_ctrlrequest ctrlreq CACHEALIGN_ATTR;

int usb_drv_port_speed(void)

{

    return (DSTS & 2) == 0 ? 1 : 0;

}

void reset_endpoints(int reinit)

{

    unsigned int i;

    for (i = 0; i < sizeof(endpoints)/sizeof(struct ep_type); i++)

    {

        if (reinit) endpoints[i].active = false;

        endpoints[i].busy = false;

        endpoints[i].rc = -1;

        endpoints[i].done = true;

        wakeup_signal(&endpoints[i].complete);

    }

    DIEPCTL0 = 0x8800;  /* EP0 IN ACTIVE NEXT=1 */

    DOEPCTL0 = 0x8000;  /* EP0 OUT ACTIVE */

    DOEPTSIZ0 = 0x20080040;  /* EP0 OUT Transfer Size:

                                64 Bytes, 1 Packet, 1 Setup Packet */

    DOEPDMA0 = (uint32_t)&ctrlreq;

    DOEPCTL0 |= 0x84000000;  /* EP0 OUT ENABLE CLEARNAK */

    if (reinit)

    {

        /* The size is getting set to zero, because we don't know

           whether we are Full Speed or High Speed at this stage */

        /* EP1 IN INACTIVE DATA0 SIZE=0 NEXT=3 */

        DIEPCTL1 = 0x10001800;

        /* EP2 OUT INACTIVE DATA0 SIZE=0 */

        DOEPCTL2 = 0x10000000;

        /* EP3 IN INACTIVE DATA0 SIZE=0 NEXT=0 */

        DIEPCTL3 = 0x10000000;

        /* EP4 OUT INACTIVE DATA0 SIZE=0 */

        DOEPCTL4 = 0x10000000;

    }

    else

    {

        /* INACTIVE DATA0 */

        DIEPCTL1 = (DIEPCTL1 & ~0x00008000) | 0x10000000;

        DOEPCTL2 = (DOEPCTL2 & ~0x00008000) | 0x10000000;

        DIEPCTL3 = (DIEPCTL3 & ~0x00008000) | 0x10000000;

        DOEPCTL4 = (DOEPCTL4 & ~0x00008000) | 0x10000000;

    }

    DAINTMSK = 0xFFFFFFFF;  /* Enable interrupts on all EPs */

}

int usb_drv_request_endpoint(int type, int dir)

{

    size_t ep;

    int ret = -1;

    if (dir == USB_DIR_IN) ep = 1;

    else ep = 2;

    while (ep < 5)

    {

        if (!endpoints[ep].active)

        {

            endpoints[ep].active = true;

            ret = ep | dir;

            uint32_t newbits = (type << 18) | 0x10000000;

            if (dir) DIEPCTL(ep) = (DIEPCTL(ep) & ~0x000C0000) | newbits;

            else DOEPCTL(ep) = (DOEPCTL(ep) & ~0x000C0000) | newbits;

            break;

        }

        ep += 2;

    }

    return ret;

}

void usb_drv_release_endpoint(int ep)

{

    ep = ep & 0x7f;

    if (ep < 1 || ep > USB_NUM_ENDPOINTS) return;

    endpoints[ep].active = false;

}

static void usb_reset(void)

{

    volatile int i;

    DCTL = 0x802;  /* Soft Disconnect */

    OPHYPWR = 0;  /* PHY: Power up */

    OPHYUNK1 = 0xFFFFFFFF;

    OPHYUNK2 = 0xE3F;

    OPHYCLK = 0;  /* PHY: 48MHz clock */

    ORSTCON = 1;  /* PHY: Assert Software Reset */

    udelay(10);

    ORSTCON = 0;  /* PHY: Deassert Software Reset */

    GRSTCTL = 1;  /* OTG: Assert Software Reset */

    while (GRSTCTL & 1);  /* Wait for OTG to ack reset */

    while (!(GRSTCTL & 0x80000000));  /* Wait for OTG AHB master idle */

    GRXFSIZ = 0x00000200;  /* RX FIFO: 512 bytes */

    GNPTXFSIZ = 0x02000200;  /* Non-periodic TX FIFO: 512 bytes */

    GAHBCFG = 0x27;  /* OTG AHB config: Unmask ints, burst length 4, DMA on */

    GUSBCFG = 0x1408;  /* OTG: 16bit PHY and some reserved bits */

    DCFG = 4;  /* Address 0 */

    DCTL = 0x800;  /* Soft Reconnect */

    DIEPMSK = 0x0D;  /* IN EP interrupt mask */

    DOEPMSK = 0x0D;  /* IN EP interrupt mask */

    DAINTMSK = 0xFFFFFFFF;  /* Enable interrupts on all endpoints */

    GINTMSK = 0xC3000;  /* Interrupt mask: IN event, OUT event, bus reset */

    reset_endpoints(1);

}

/* IRQ handler */

void INT_USB_FUNC(void)

{

    int i;

    uint32_t ints = GINTSTS;

    uint32_t epints;

    if (ints & 0x1000)  /* bus reset */

    {

        DCFG = 4;  /* Address 0 */

        reset_endpoints(1);

        usb_handle_bus_reset();

    }

    if (ints & 0x2000)  /* enumeration done, we now know the speed */

    {

        /* Set up the maximum packet sizes accordingly */

        uint32_t maxpacket = usb_drv_port_speed() ? 512 : 64;

        DIEPCTL1 = (DIEPCTL1 & ~0x000003FF) | maxpacket;

        DOEPCTL2 = (DOEPCTL2 & ~0x000003FF) | maxpacket;

        DIEPCTL3 = (DIEPCTL3 & ~0x000003FF) | maxpacket;

        DOEPCTL4 = (DOEPCTL4 & ~0x000003FF) | maxpacket;

    }

    if (ints & 0x40000)  /* IN EP event */

        for (i = 0; i < 4; i += i + 1)  // 0, 1, 3

            if (epints = DIEPINT(i))

            {

                if (epints & 1)  /* Transfer completed */

                {

                    invalidate_dcache();

                    int bytes = endpoints[i].size - (DIEPTSIZ(i) & 0x3FFFF);

                    if (endpoints[i].busy)

                    {

                        endpoints[i].busy = false;

                        endpoints[i].rc = 0;

                        endpoints[i].done = true;

                        usb_handle_transfer_complete(i, USB_DIR_IN, 0, bytes);

                        wakeup_signal(&endpoints[i].complete);

                    }

                }

                if (epints & 4)  /* AHB error */

                    panicf(PANIC_FATAL, "USB: AHB error on IN EP%d", i);

                if (epints & 8)  /* Timeout */

                {

                    if (endpoints[i].busy)

                    {

                        endpoints[i].busy = false;

                        endpoints[i].rc = 1;

                        endpoints[i].done = true;

                        wakeup_signal(&endpoints[i].complete);

                    }

                }

                DIEPINT(i) = epints;

            }

    if (ints & 0x80000)  /* OUT EP event */

        for (i = 0; i < 5; i += 2)  // 0, 2, 4

            if (epints = DOEPINT(i))

            {

                if (epints & 1)  /* Transfer completed */

                {

                    invalidate_dcache();

                    int bytes = endpoints[i].size - (DOEPTSIZ(i) & 0x3FFFF);

                    if (endpoints[i].busy)

                    {

                        endpoints[i].busy = false;

                        endpoints[i].rc = 0;

                        endpoints[i].done = true;

                        usb_handle_transfer_complete(i, USB_DIR_OUT, 0, bytes);

                        wakeup_signal(&endpoints[i].complete);

                    }

                }

                if (epints & 4)  /* AHB error */

                    panicf(PANIC_FATAL, "USB: AHB error on OUT EP%d", i);

                if (epints & 8)  /* SETUP phase done */

                {

                    invalidate_dcache();

                    if (i == 0) usb_handle_control_request(&ctrlreq);

                    else panicf(PANIC_FATAL, "USB: SETUP done on OUT EP%d!?", i);

                }

                /* Make sure EP0 OUT is set up to accept the next request */

                if (!i)

                {

                    DOEPTSIZ0 = 0x20080040;

                    DOEPDMA0 = (uint32_t)&ctrlreq;

                    DOEPCTL0 |= 0x84000000;

                }

                DOEPINT(i) = epints;

            }

    GINTSTS = ints;

}

void usb_drv_set_address(int address)

{

    DCFG = (DCFG & ~0x7F0) | (address << 4);

}

void ep_send(int ep, const void *ptr, int length)

{

    endpoints[ep].busy = true;

    endpoints[ep].size = length;

    DIEPCTL(ep) |= 0x8000;  /* EPx OUT ACTIVE */

    int blocksize = usb_drv_port_speed() ? 512 : 64;

    int packets = (length + blocksize - 1) / blocksize;

    if (!length)

    {

        DIEPTSIZ(ep) = 1 << 19;  /* one empty packet */

        DIEPDMA(ep) = 0x10000000;  /* dummy address */

    }

    else

    {

        DIEPTSIZ(ep) = length | (packets << 19);

        DIEPDMA(ep) = (uint32_t)ptr;

//        if (length > 64) panicf(PANIC_FATAL, "%08X %08X %08X\n%08X %08X %08X", ptr, length | (packets << 19), DIEPCTL(ep), DIEPDMA(ep), DIEPTSIZ(ep), DIEPINT(ep));

    }

    clean_dcache();

    DIEPCTL(ep) |= 0x84000000;  /* EPx OUT ENABLE CLEARNAK */

}

void ep_recv(int ep, void *ptr, int length)

{

    endpoints[ep].busy = true;

    endpoints[ep].size = length;

    DOEPCTL(ep) &= ~0x20000;  /* EPx UNSTALL */

    DOEPCTL(ep) |= 0x8000;  /* EPx OUT ACTIVE */

    int blocksize = usb_drv_port_speed() ? 512 : 64;

    int packets = (length + blocksize - 1) / blocksize;

    if (!length)

    {

        DOEPTSIZ(ep) = 1 << 19;  /* one empty packet */

        DOEPDMA(ep) = 0x10000000;  /* dummy address */

    }

    else

    {

        DOEPTSIZ(ep) = length | (packets << 19);

        DOEPDMA(ep) = (uint32_t)ptr;

    }

    clean_dcache();

    DOEPCTL(ep) |= 0x84000000;  /* EPx OUT ENABLE CLEARNAK */

}

int usb_drv_send(int endpoint, const void *ptr, int length)

{

    endpoint &= 0x7f;

    endpoints[endpoint].done = false;

    ep_send(endpoint, ptr, length);

    while (!endpoints[endpoint].done && endpoints[endpoint].busy)

        wakeup_wait(&endpoints[endpoint].complete, TIMEOUT_BLOCK);

    return endpoints[endpoint].rc;

}

int usb_drv_send_nonblocking(int endpoint, const void *ptr, int length)

{

    ep_send(endpoint & 0x7f, ptr, length);

    return 0;

}

int usb_drv_recv(int endpoint, void* ptr, int length)

{

    ep_recv(endpoint & 0x7f, ptr, length);

    return 0;

}

void usb_drv_cancel_all_transfers(void)

{

    uint32_t mode = enter_critical_section();

    reset_endpoints(0);

    leave_critical_section(mode);

}

bool usb_drv_stalled(int endpoint, bool in)

{

    if (in) return DIEPCTL(endpoint) & 0x00200000 ? true : false;

    else return DOEPCTL(endpoint) & 0x00200000 ? true : false;

}

void usb_drv_stall(int endpoint, bool stall, bool in)

{

    if (in)

    {

        if (stall) DIEPCTL(endpoint) |= 0x00200000;

        else DIEPCTL(endpoint) &= ~0x00200000;

    }

    else

    {

        if (stall) DOEPCTL(endpoint) |= 0x00200000;

        else DOEPCTL(endpoint) &= ~0x00200000;

    }

}

void usb_drv_init(void)

{

    unsigned int i;

    for (i = 0; i < sizeof(endpoints)/sizeof(struct ep_type); i++)

        wakeup_init(&endpoints[i].complete);

    /* Enable USB clock */

    PWRCON &= ~0x4000;

    PWRCONEXT &= ~0x800;

    PCGCCTL = 0;

    /* unmask irq */

    INTMSK |= INTMSK_USB_OTG;

    /* reset the beast */

    usb_reset();

}

int usb_drv_get_max_out_size()

{

    return usb_drv_port_speed() ? 262144 : 32768;

}

int usb_drv_get_max_in_size()

{

    return usb_drv_port_speed() ? 262144 : 32768;

}